Tarnish preventive EN-20 |
Brightener
A4 |
avoids tarnishes when tempering |
free of lead and cadmium |
application when tempering without protective gas, e.g.
400 °C |
produce a better brightness than cadmium and other metals |
the electroless nickel layer remains as deposited |
made a better ductility and corrosion protection |
|
|
Wetting
agent
EN-2
|
Wetting agent EN-40 |
against
pores and pits |
produces
film of foam, decreases surface tension |
for
ground, turned and polished surfaces |
prevents bad smells and emissions |
suitable
for brass, steel, aluminium, magnesium |
good rinsing ability, more effective, because no texapon |
|
|
Activation
EN |
Accelerator
EN |
provide
for a first consistently good deposition |
increased
the deposition speed between 2 and 5 µm/h |
activated the deposition at critical areas |
suitable
for baths with high contaminations or also with a higher salt quantity |
|
|
Grain
refiner EN |
Process HP-6 |
reduced
inside tension in the coat |
lead and cadmium free |
have
a lighter effect |
>20
mto on basis of 5 g/l Ni pressure strength |
|
extremely
reduced the quantity of salt - sulfate free |
Process
EN-1 |
1
make-up solution, high-phos, 10 - 13 % P |
lead and cadmium free |
|
> 7 mto on basis 6 g/l Ni |
Process HP-7 |
hard coats |
lead and cadmium free |
1
make-up solution, quick depositing, 5 - 9 % P |
>10 mto on basis of 6 g/l Ni |
|
extremely
reduced the quantity of salt - sulfate free |
Process EN-2 |
1
make-up solution, high-phos, 10 - 13 % P |
lead and cadmium free |
|
> 7 mto on basis 6 g/l Ni |
Process HP-8 |
good
light-off performance even with low liter charge |
> 7 mto on basis 5 g/l Ni |
1
make-up solution, quick depositing, 5 - 9 % P |
very good ductility |
|
big range of liter charge |
Process EN-3 |
1
make-up solution, high-phos, 10 - 13 % P |
> 7 mto on basis 5 g/l Ni |
|
constant optic till 7 MTO |
|
without bright problems |
|
1
make-up solution, quick depositing, 5 - 9 % P |
|